INDUSTRIAL WATER-BASED COATINGS

Industrial Water-Based Coatings
  • INDUSTRIAL PAINTS AND COATINGS

    Pipe

  • INDUSTRIAL PAINTS AND COATINGS

    Pumps

  • INDUSTRIAL PAINTS AND COATINGS

    Container

  • Slide Title

    Engine

    Button
  • Slide Title

    Automotive

    Button

Low-VOC, Water-Based Paints & Coatings

Whether you need coatings for pipes, pumps, containers, engines, or other automotive parts, Jamestown Coating Technologies in Jamestown, PA has the paints you’re looking for. We specialize in providing a number of water-reducible coatings, such as low-VOC paints and water-based paints. 

The water-based coating types we provide include:

Alkyd

Alkyd is easy to apply and has the benefit of protective qualities. Spray, dip, and flow coat application types are available. Alkyd’s cures are air dry, force dry, and bake. Its VOC is 2.5-3.0. Alkyd is available for heavy equipment, containers, automotive, castings, and general metal.
Acrylic Emulsion
Acrylic Emulsion is fast dry with a number of protective qualities and a low VOC. Spray, dip, and flow coat application types are available. Its cures are air dry, force dry, and bake. The VOC range for this is less than 2.0. Acrylic Emulsion is widely used in pipe & tube markets and general metal.
Water-Soluble Acrylic
Water-Soluble Acrylic has the benefit of gloss retention, hardness, and dip tank stability. Spray, dip, and flow coat application types are available. Its cure is bake. Water-Soluble Acrylic produces a VOC range of 2.5-3.0. This coating is primarily found in metal furniture, lockers, and shelving.
2-Component Epoxy Primer
2-Component Epoxy Primer is known for corrosion resistance, fast dry, and durability. It uses a spray application type. Its cure is air dry and its VOC range is less than 3.5. The markets that most commonly use 2-Component Epoxy Primer are heavy equipment, flooring, and maintenance.
2-Component Acrylic Topcoat
2-Component Acrylic Topcoat has non-isocyanate, zero HAPS, and low-VOC benefits. It uses a spray application and its cure is air dry. 2-Component Acrylic Topcoat has a VOC range of less than 3.5 and is found in the heavy equipment market.
PVDC
PVDC has a high-film build with a fast air dry, low VOC, and protective qualities. Its application type is spray, and cure is air dry. You’ll find PVDC has a VOC range less than 1.0. PVDC is utilized in wheel hubs and axles as well as various automotive markets.
Anodic E-Coat
Anodic E-Coat has the benefit of transfer efficiency as well as flexibility and a low VOC. It uses a dip application type and a bake cure. Anodic E-Coat has a VOC range of 2.0-3.0 and can be seen in wire hanger and small tools markets.
Share by: